Lead Climbing Clipping Technique You Should Learn Before You Climb


lead climbing clipping techniques

Lead Climbing is often referred to as Sport Climbing. In lead climbing, certain protection points are permanently bolted on the ground, which helps you climb up. Lead climbing can be thrilling, challenging, and exhausting. In lead climbing, you have to push yourself both physically and mentally. To do lead climbing, you should be comfortable and skilled with the method. Before doing lead climbing, people usually practice top-rope climbing, which has an anchor at the top. In lead climbing, it is also essential to learn about the Lead Climbing Clipping Technique. Lead Climbing Clipping Technique requires your full technical attention to help you rise safely. This technique expects the person to maintain their energy and to stay focused on the climb so that there are lessened chances of the person getting hurt or getting any injury.

Lead Climbing Clipping Technique – Body Positions To Keep In Mind

A view of a rocky mountain

Lead climbing clipping Technique expects you not to have a subtle urge to climb up in one go. You shouldn’t be distracted from your desire to climb up fast and save up your energy and strength. One should do Lead clipping with patience and techniques. It is also essential that you must hold a secure position to avoid any misfortune before clipping in the next clip. Instead of bending your arm, try to keep your arm straight as when we are scared, we tend to over grip and tend to come down way harder than necessary. Straight arms while climbing is an ideal position for the Lead Climbing Clipping Technique as it will avoid any strain and keep your body stable.

Hand Strategy In Lead Climbing Clipping Technique

A person is cross country skiing in the snow

Your hand position is equally crucial as your body position to ensure a safe ascend to the target point. There are two techniques for it.

Forehead clipping: you need to grab the rope and press the carabiner with your thumb and slowly push against the rope with your pointer finger’s side to open and enter the rope inside the carabiner.

Backhand clipping: for this method, grab the rope with your thumb and pointer finger, stabilize your carabiner, and quickly withdraw it with your middle finger. To flick the rope in the carabiner, twist your wrist.

Lead Climbing Clipping Technique Safety Tips

Make sure to keep your fingers out of the carabiner. Keep your legs untangled. If they get tangled, and you fall, then you might get massive rope burn or might get flipped. While doing Z clipping, move from one carabiner to others, make sure to avoid movement, and keep your body stable.

Always wear a Climbing helmet to protect your head from falling rocks. Before starting climbing, have a thorough look at the route and strategies in your mind regarding the equipment, climbing route, and the quickdraws. Avoid back clipping if the rope is in the front. Once you are harnessed, make sure to check that your harness buckles are doubled back. If you are a beginner, you must take proper training from a person who has experience in Lead Climbing Clipping Technique. You should be aware of the dangers involved with climbing, and you should not climb over your head.

Conclusion

Thus, the Lead Climbing Clipping Technique requires utmost care and daily practice for a safe and stable climb. One should have a thorough knowledge of the Lead Climbing Clipping Technique before putting it in action. The body positions and the hand techniques to maintain during the climb should be on the climbers’ tips.

Subscribe to our monthly Newsletter
Subscribe to our monthly Newsletter